Gas Courses

How do I become a gas engineer?

Becoming a gas engineer typically involves completing appropriate gas training, gaining supervised workplace experience, and completing the relevant assessments for the type of gas work you intend to undertake.

For those entering the industry with little or no previous gas experience, the Level 3 Gas Engineering Managed Learning Programme (MLP) provides a structured training route combining centre-based learning with supervised workplace experience.

During the programme, learners develop their technical knowledge and practical skills before gaining supervised experience in a real working environment. This workplace experience is recorded through a Gas Work Log (Portfolio of Evidence) and forms an important part of progression through the programme.

Once the required training and workplace evidence have been completed, learners can progress to the relevant final assessments and ACS assessments, including CCN1 Core Domestic Gas Safety and any appliance categories required for their intended scope of work.

Successful completion of the relevant training and assessments can support progression towards Gas Safe registration. Gas Safe registration is a separate process and applicants must meet the relevant registration requirements before undertaking gas work that legally requires registration.

Your exact route will depend on your existing qualifications, experience and the type of gas work you want to undertake.

What is CCN1 Core Domestic Gas Safety?

CCN1 Core Domestic Gas Safety is a core ACS assessment for operatives working with domestic gas installations. It assesses the fundamental gas safety knowledge and practical competence that underpins domestic gas work.

CCN1 covers areas including gas safety legislation and standards, combustion, ventilation and flues, gas safety controls and procedures, tightness testing and purging, appliance installation and commissioning, the use of testing equipment and the identification of unsafe situations.

CCN1 also provides the core domestic gas safety assessment that underpins a range of appliance-specific ACS categories. Depending on the type of gas work you intend to undertake, these can include MET1 for domestic gas meters, CKR1 for domestic gas cooking appliances, HTR1 for domestic gas fires and wall heaters, and CENWAT for central heating boilers and water heaters.

Kelly Energy Training offers both CCN1 Initial Assessment and CCN1 Reassessment. The appropriate route will depend on your existing qualifications, experience and current certification.

CCN1 Initial Assessment → CCN1 Reassessment → Contact Us →

What is an ACS gas qualification?

ACS stands for the Accredited Certification Scheme. ACS assessments are used to assess the competence of gas operatives in specific areas of gas work.

The assessments required will depend on the type of gas work and appliances you intend to work on. CCN1 Core Domestic Gas Safety covers core domestic gas safety competence, with additional appliance-specific ACS assessments available depending on your intended scope of work.

Kelly Energy Training offers a range of ACS assessments through LCL Awards, including:

• CCN1 – Core Domestic Gas Safety
• MET1 – Domestic Gas Meters
• CKR1 – Domestic Gas Cooking Appliances
• HTR1 – Domestic Gas Fires & Wall Heaters
• CENWAT – Central Heating Boilers & Water Heaters

The appropriate ACS assessments will depend on your existing qualifications, experience, current certification and the type of gas work you intend to undertake.

Contact Us →

What is the difference between ACS Initial Assessment and Reassessment?

An ACS Initial Assessment is generally for eligible candidates undertaking an ACS assessment for the first time in a particular area, or where they do not hold the relevant current certification required for a reassessment route.

An ACS Reassessment is designed for experienced gas operatives who already hold, or have previously held, the relevant ACS certification and need to demonstrate their competence again as part of the renewal process.

Eligibility and entry requirements can vary depending on the assessment and your certification history. For example, the CCN1 Reassessment route is intended for candidates who meet the relevant previous-certification requirements.

Candidates should check the individual course requirements before booking and provide evidence of previous certification where required.

If you're unsure whether you need an Initial Assessment or Reassessment, our team can help you identify the appropriate route based on your qualifications, experience and certification history.

CCN1 Initial Assessment → CCN1 Reassessment → Contact Us →

Can I become a gas engineer with no previous experience?

Yes. There are training routes available for people who are new to the gas industry, although becoming competent to undertake gas work requires more than completing a short course or single assessment.

For new entrants, the Level 3 Gas Engineering Managed Learning Programme provides a structured route combining centre-based training with supervised workplace experience.

The programme covers areas including gas safety legislation, installation principles, tightness testing and purging, pipework installation, domestic gas appliances, fault-finding and diagnostics, practical training and preparation for final assessments.

Learners must also gain supervised workplace experience with a suitably competent Gas Safe registered engineer or approved workplace mentor. This allows learners to develop practical experience and build the required portfolio of workplace evidence before progressing to the final assessment stage.

If you're considering a career as a gas engineer and have no previous experience, our Gas Engineering Pathway explains the training, workplace experience and assessments involved in progressing into the industry.

What is a Gas Managed Learning Programme (MLP)?

A Gas Managed Learning Programme (MLP) is a structured training route for people entering the gas industry, including new entrants and learners with relevant existing experience or knowledge of the building engineering sector.

The programme combines centre-based technical and practical training with supervised workplace experience, allowing learners to develop their knowledge and practical competence before progressing to the relevant assessments.

At Kelly Energy Training, the Level 3 Gas Engineering Managed Learning Programme includes 43 days of centre-based training. Training covers areas including gas safety legislation, installation principles, tightness testing and purging, pipework installation, domestic gas appliances, fault-finding and diagnostics, practical workshop activities and preparation for assessment.

Learners must also complete supervised workplace experience with a suitably competent Gas Safe registered engineer or approved workplace mentor. During this stage, learners build their Gas Work Log (Portfolio of Evidence) by recording practical experience gained in a real working environment.

Once the required centre-based training and workplace portfolio have been completed, learners can progress to the relevant final assessments and initial ACS assessments.

Do I need workplace experience to become a gas engineer?

Yes. Workplace experience is an important part of developing competence in gas engineering, particularly for new entrants following a Managed Learning Programme route.

Kelly Energy Training's Level 3 Gas Engineering Managed Learning Programme combines centre-based training with supervised workplace experience.

Learners must gain practical experience under the supervision of a suitably competent Gas Safe registered engineer or approved workplace mentor. This allows learners to apply their training in real working environments and develop practical competence across relevant gas activities.

During this period, learners complete a Gas Work Log (Portfolio of Evidence) documenting their supervised workplace experience. The required workplace evidence must be completed before progressing to the relevant final assessment stage.

If you're considering entering the gas industry, it's important to plan for both parts of the journey: your centre-based training and access to suitable supervised workplace experience.

What qualifications do I need to work on domestic gas appliances?

The qualifications and ACS assessments you need will depend on the type of domestic gas work you intend to undertake and the appliances you want to work on.

CCN1 Core Domestic Gas Safety covers the core gas safety competence that underpins domestic ACS appliance categories. Depending on your intended scope of work, you may then need the relevant appliance-specific assessments.

• MET1 – Domestic Gas Meters

• CKR1 – Domestic Gas Cooking Appliances

• HTR1 – Domestic Gas Fires & Wall Heaters

• CENWAT – Central Heating Boilers & Water Heaters

The appropriate combination will depend on your existing qualifications, experience, current certification and the scope of gas work you intend to undertake. Candidates should check the entry requirements for each ACS assessment before booking.

If you need CCN1 alongside several appliance categories, Kelly Energy Training also offers a combined Domestic Gas Package.

What are MET1, CKR1, HTR1 and CENWAT?

MET1, CKR1, HTR1 and CENWAT are appliance-specific ACS assessments covering different areas of domestic gas work. The assessments you need will depend on the appliances and type of gas work you intend to undertake.

• MET1 – Domestic Gas Meters: Covers domestic gas meters, including relevant installation, exchange, commissioning and disconnection activities.

• CKR1 – Domestic Gas Cooking Appliances: Covers domestic gas cooking appliances such as cookers, hobs and range cookers.

• HTR1 – Domestic Gas Fires & Wall Heaters: Covers relevant domestic gas fires and wall heaters.

• CENWAT – Central Heating Boilers & Water Heaters: Covers relevant domestic gas-fired central heating boilers and water heaters.

These appliance assessments are undertaken alongside the relevant core domestic gas safety requirements. Entry requirements vary, so candidates should check the individual course page and ensure they hold the appropriate core certification before booking.

Kelly Energy Training offers these ACS assessments individually, as well as a combined training package for engineers who need multiple domestic gas categories.

How do I become Gas Safe registered?

Becoming Gas Safe registered involves completing the appropriate training and assessments for the type of gas work you intend to undertake, gaining the required practical competence, and meeting the relevant requirements for registration.

For new entrants, a structured route such as the Level 3 Gas Engineering Managed Learning Programme can provide a pathway into the industry. This combines centre-based training with supervised workplace experience and the completion of a Gas Work Log (Portfolio of Evidence).

Once the required training and workplace evidence have been completed, learners can progress to the relevant final assessments and ACS assessments for their intended scope of gas work.

Successful completion of the relevant training and assessments can support progression towards Gas Safe registration. Gas Safe registration is a separate process and applicants must meet the current registration requirements before undertaking gas work that legally requires registration.

The exact route will depend on your existing qualifications, experience and the type of gas work you intend to undertake. If you're new to the industry, our Gas Engineering Pathway explains how the different stages fit together.